Email this guide. If it where not for the need to support the phone line i would dump the Sagemcom entirely. This wiki and all scripts that will be added under this repo has been made by wuseman and is licensed under GPL Version 3. . I've solved the problem by putting a switch on the output of the NBN interface and one line to the Optus router which has dhcp and wireless disabled and now only services the phone line. I was a little cautious and noted that I hadn't been on the net all day and wanted to mnitor it a bit before I let them claim all was well and close the job. VLAN tagging not supported.- FTTN: Occasional dropouts and loss of internet up to 1 hour until rebooted. Same as above but just another device of the same model and firmware and A new ft232dl reader since I experimenting I believe it's independent of RSP. I had great 2.4 ghz up until a month ago when something happened in my apartment. After trying 2 sagecrap modems and getting multiple dropouts and lockups daily I bought a netcomm 18acv (only because ABB use it so thought it might be reasonable), it will still lockup but only on average once a month. Optus offers a Sagemcom 3864V3 or 3864 gateway (router with a phone point) as the only option. When I try and set the Sagemcoms IP to a range in 192.168.1.xxx it just flips and I have to do a hard reset. Here is the current router in the list. if they have done it right. Now I can have the Netgear CG3000 as backup. Appears Optus have rolled out a firmware update for the Sagemcom that allows you to add DHCP lease entries without using the complicated approach: https://yescrowd.optus.com.au/t5/NBN/Sagemcom-F-ST-3864V3AC-Static-IP-page-missing/td-p/414019. That's why connecting the Optus modem-router until incoming calls are being received is a very wise first step. After all, it's only going to the phone. At least with 5ghz it doesn't penetrate walls so easily and mmwave moreso. They really want people to start moving. More. Alot has happened since I did this repo in 2018 and did it public in January, 2019, Sagemcom has now become become a "mission-driven company" Since January 2022: https://www.sagemcom.com/en/group. Everything works but it randomly restarts multiple times a day, I'm yet to see uptime of greater than 24hrs. You actually have to add an exception. If you download an app like Wifi-Analyzer for your smart phone you can see all the other WiFi networks that are visible in your home and the channels they're using. I'm aware I'll have to log in with the Sagemcom by itself first to establish a connection to use the VOIP, but will try the switch / port forwarding methods as well. Finally I found all the old pictures and it's been years now since this repo was created. Gas. Download both firmwares and install the older default firmware 2600t. Is there an issue bridging the modems optus use or not? Five hours later they called me back to ask if everything was OK. Online comments really bag this router so is anyone using it and with what results. Firmware for Sagemcom F@st 2704 brought by TPSA - Polish ISP. I haven't yet convinced myself whether it is the Cable modem or the wfi router; there's time for that later. They are all cheapos the ISPs give out but usually they have the dhcp fixed assignment option which you can use to solve the networking problems with DHCP that most will probably run into. Not me, the provider. Help . I dont want to lose the phone landline so I have to keep the sagecom after reading so many reports about how rubbish it is I think I am going to have to replace it but if I cannot get the above to work I am reluctant to spend more cash. This is an apartment. In the case you are describing, we would need to leave Optus, as they have control of the VoIP business lines. For a "freebee" it ain't too bad once configured. View detailed information and reviews for 5366 Edgewood Dr in Provo, UT and get driving directions with road conditions and live traffic updates along the way. The Network and Signal lights aren't present because, unlike the Optus Ultra WiFi Modem, this Sagemcom modem-router doesn't have a 4G backup option if the fixed-line network goes down. Though I don't use the WiFi on mine because I can see too many other networks in my home. Go. I get plenty of WiFi coverage it's my neighbours that will suffer because of it. Hotels. Services NEC. . If you can obtain the SIP settings you don't even need the 3864, otherwise just set the 3864 within your preferred wifi router's IP range, disable its wifi & connect the phone line. I recently went over to optus and am using the Sagemcom F@ST3864V3AC router yes totally crapI can see my QNAP NAS, I can access the admin pages using its network address, but can not access any of my files. Another option is to wait it out till there is a firmware upgrade and install it then. I turned the Wi-Fi off on the Sagecom F@st 3864v3 as soon as I got and it seems to be stable for our NBN connection (once activated correctly). Our house is difficult, big, old, thick brick walls. We don't dispute that, but in the case described, we are just trying to eliminate 1 issue, namely failure of the Optus supplied router. I'm not even sure if my current handsets will be able to use VoIP in anycase, but I want my router & Pi Hole to work as they are now. Not being able to access my network remotely is an instant disqualifier for me and other people are noticing and complaining on the yescrowd forum. With my higher gain antennas, I pick up a gazillion SSIDs, but 2.4/5ghz N/AC performance is acceptable. These photos I took to remember RX/TX/GND to NOT come when v3.3 on the first router. - HFC: no problem.-Their Wi-Fi quality is crap, during busy hours 3864OP fluctuates 28 36Mbps (single band 2.4) but 3864V3 HP is better 58 Mbps (2.4GHz) and 70-80 Mbps (5GHz). I had a few times when I first got it where I would have to power cycle it as it froze but since then it's been OK. B. with "crazy" things and the serial readers gets and these devices break extremely easily if you guess pins etc so this is NOT because because a wrong baudrate of course, it was a "let's fuck this router and see what happens" time, Just another device and other tools for trying AGAIN to hack the last firmware release After putting up with the poor range and occasional wifi dropouts I went back to the Netgear 3000v2, much happier. Refreshed attached devices and voila, Optus IP is now fixed. we need use newRequest and we also will use a function for this, You'll need to initially direct connect to the Arris NBN HFC cablemodem to activate your Optus account. 192.168.0.1 returns me the Sagemcom homepage. What follows has been posted many times here. Enter the IP 192.168.254.254 into your browser and pressing enter. Mine was connected by a LAN cable. An experience. I will always share this on my github and NO where else, not even a CVE but Did this solution solve the problem? Does anyone know what net address range the incoming VOIP traffic comes from, because at the moment I've had to set it to allow traffic from anywhere to forward to the Sagemcom, and I'd prefer if this could perhaps be limited to Optus VOIP server. A tag already exists with the provided branch name. Just looking for a quick redundancy method. Search for your device here. I have tried several ip addresses (both within and outside of the assignable range) and with DHCP on the Sagemcom both disabled and enabled. Not on NBN, yet my self. No need to be concerned if there's an issue with that yet. Sometimes the wifi would die, other times the phone would stop working and sometimes I'd lose everything. Na, was on 25 from the start with Fetch, they then said I can get a free upgrade to 50 at no extra cost. I got nbn installed just about a month agoAnd nothing but dropouts on Wi-FiConnected by Ethernet is fine No issues. i have tried everything almost i belive, an example wich works to execute but Edit: Fixed! is there someone who can explain to me the best way to fix this? Upload speed not affected. Connecting my existing wifi router (Asus AX AiMesh RT-AX92U) to the switch. So far, I have a nice stable connection as solid base to start from next week when my Orbi is delivered and I put my switch back into the mix (Netgear GC110P) and stash the Sagemcom in the cupboard (thanks for the advice newline). Dumping the firmware; Full list of URLs; PSI configuration decoder; References. With that I get great coverage everywhere. I have a number of internet radios and Foxtel via internet and it became really annoying that it dropped out for 15 to 20 seconds a few times and hour. They were looking to close the job out which seemed a little eager to me so I clarified if the NBN team remote tech team had done something to fix it. Can you bridge and still use optus NBN's phoneline? NOT a wannabe criminal black hat hacker because for me hacking is for fun and without any profits at all for education and sharing knowledge for fun! They may have pushed a decent firmware upgrade out? My recently arrived neighbours are awaiting NBN connection and have been using my 2.4 GHz signal for about 10 days through 1.5 brick walls and more than 15 metres away from my router to their nearest wall. Shopping. Thanks, obviously they need to update their website. If you're using Optus NBN HFC for your primary path, you should be using Telstra 4G for your alternate path or similar. Addeddate 2020-11-11 16:22:01 Identifier sagemcom-fast-2704-tpsa-firmware Scanner Internet Archive HTML5 Uploader 1.6.4. plus-circle Add Review. Enter your router username. The wifi sucks but for just a modem, it does the job. NBN tech came in on Friday and said everything was good to go. there is tons of settings to enable to get a really powerful router. https://www.ebay.com.au/i/392361346135?chn=ps&norover=1&mkevt=1&mkrid=705-139619-5960-0&mkcid=2&itemid=392361346135&targetid=752504887904&device=c&mktype=pla&googleloc=9071827&poi=&campaignid=1979582348&mkgroupid=72745766764&rlsatarget=pla-752504887904&abcId=1139426&merchantid=7364522&gclid=EAIaIQobChMI8bbrqpOi5AIVWSUrCh0RHQ6TEAQYASABEgKrmPD_BwE. This is my personal wiki for hacking the router firmware used by (Sagemcom)F@st Version 3.43.2 delivered from Sagemcom. I'm not talking about range. also Sagemcom that can use our network and sniff traffic, Yes, I have other wifi extenders (one of which is the Telstra Sagemcom that I got when my grandma past away) and switches in my apartment but it does its job good enough without causing me any hassles anymore due to this firmware update. I'll share my sytem set-up and some comments about performance when I get everything up and running to my satisfaction. Update the modem software. Connect the modem to your computer/device There are two ways to connect A. I will turn the wifi off the Sagemcom once I know everything sweet. I should note this affect both WiFi and wired devices. Most routers have a web interface. The white box was crap and if I logged on to Netflix my wife would lose phone connectivity on FaceTime! F@ST 5366 LTE-A. login to the setup and select "always use ethernet" instead of "always use cable" (thanks to a Whirlpoolian in another thread) but it picked up the NBN connection no problems and is working fine. I can see it when I'm even surfing the internet. It's range is terrible, even with 2.4G. Then started getting letters about switching to NBN so figured I'd stay with optus. For the very brief time I was with Optus NBN, they gave me a Sagemcom 5366TN I noticed that it was hitting my network 'honeypot' with this probe and a bunch of others. Speedwise everything is fine, I'd just prefer the DHCP set up to be left up to the R7000. If it is or is not a business account, you should ask at Yes Crowd, https://yescrowd.optus.com.au/, with your question. As usual, I do this for YOU completely free and you can share and change this wiki as much as you want, it would be appreciated if you added a url to this original readme to help us all for sharing knowledge and contribute to a safer internet if you want - You are certainly not forced to this, of course ;). Not a huge issue, but is there a way I can forward all requests to 192.168.0.3 (R7000 assigned IP which I hope won't change?). I've been happy with the upgrade, I don't experience any buffering or downgrading of streamed videos and Netflix/Amazon Prime etc all load swiftly over AppleTV or our laptops while family members are using other devices. That died and was replaced by Optus with a Netgear Modem and a SAGEM router. This you must figured out yourself since it's to much work to fix a wiki for this atm. probably nothing to do with the Sagem router, or Optus, I have one here on a FTTC install and it's been faultless. Oh wait. Don't use optus if you want a decent service. Here are some pictures for myself to remember these 4 years, I have spent over 600 hours of my free time on this router, here are some random pictures I never shared before but since it is now archived, so here are my 600 hours in pictures shown. 1. Luckily the older NetGear CG3000 worked with the wan port, I switched back to the old modem. Talking to Optus support ATM , they are sort of helpful but then again not. As on earlier devices and configurations from Telia Company AB they still adding access trying to hack, if it's something unique and something that I'm first with If it's not a business account, perhaps it should be. When I look through this, this find was definitely there this was extremely severe, it got so severe that there were only 2 more upgrades and then (T)Felia stopped upgrading the routers and locked completely down the router and then they started offering a newer version of Technicolor again, this was a bigger and more dangerous threat against us all then I understood back then and I guess something happened that is out of our control and it we probably never gonna know beucase cooperation between Telia and Sagemcom is canceled and now Telia went back to technicolor again and their own devs and it is for everyone and i mean EVERYONE including themselves, an incredibly important and good choice. Having converted from 100 Mbps Optus Cable (with CG3000 modem) to Optus HFC NBN ( also 100 Mbps, with Sagecom 3864) four weeks ago, I was initially concerned that the 3864 would be hopeless (especially WiFi) based on comments above. Oops sorry forgot to mention I have a FTTN NBN connection as well. everything ends up here because I hack for fun and to share everything I Find hidden settings in latest firmware (v3.42. comment. I just received the F@st 3864V3 HP Sagemcom, with NBN install due tomorrow some time and, I have a few questions. They now supply this one: /thread/3ly81vy9. If you can see more than a few other networks in your home, from neighbours, you'll be sharing frequencies and bandwidth with them all. =-=-=-=-=-=-=-=-=-=-=-= Thu Jul 16 00:27:11 2020 =-=-=-=-=-=-=-=-=-=-=-=, icmp packets: [1] iptables chain: INPUT, 1 packets, Source: 192.168.0.1 DNS: [No reverse dns info available], Destination: 192.168.1.29 DNS: Files.gdomain, Overall scan start: Wed Jul 15 23:35:33 2020 Total email alerts: 36 Syslog hostname: Files, Global stats: chain: interface: protocol: packets: INPUT eth0 icmp 57, "ICMP Destination Unreachable Network Unreachable" sid: 401 chain: INPUT packets: 1 classtype: misc-activity. Probably wise to disable wireless in the Optus router. The Netgear router I was using until recently had better wifi range than the Sagem, I'm told that if you don't need a landline phone, which I don't, you can swap it back in place of the Sagem and it will work fine. OK, I don't really understand how it all works. The Sagecom was crap for my household. Short question: There is talk that the Optus Sagemcom router is crap. No they're not. I get full speed with Ethernet, 94/38 on HFC.- WPS feature works fine, connected printer and Wi-Fi extender.You should not pay for Optus modem routers, get it for free if you can and see if it works for you. Apple thinks this may be an issue for Optus to enable the Sagemcom to be assigned a Static ip from my Airport Extreme?Optus are not sure! After some reading on the internet, it confirmed my findings of how crap this router is, I will be calling Optus for another router. Hello, seem to be having the same WiFi issues as others and I am over it. What version of firmware do you have ? (Sagemcom currently has the R7000 ip as 192.168.0.3), Now when I try to enter the R7000's default login via routelogin.net it's not recognised and I have to use 192.168.1.1. On the old modem we had no trouble with connections (obviously only 2.4Ghz) anywhere in the house but on the sagecom it is poor and unreliable (On both 2.4 and 5Ghz.) One pre NBN one post. (edit) Forgot to add that both devices have been rock solid for the entire connected period. so then it was of course not an option to NOT letting all know via this readme (be happy that i never did a bigger thing of this shit) Got the NBN installed today. (Updated: 2022/11/15, 4 years later). That is it worked for about 30 minutes then started dropping out. ? Sounds like a great outcome for me. This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository. brrrrrrrz, did you get it? Wrong the problem continued. Maybe some of those more expensive routers don't have these problems with automatic dhcp ip assignment due to more powerful cpu's I'm not sure as I haven't tried them, but you can either spend the money on that or you can just go into your router and setup fixed ip assignments and have no issues. Is the Optus branded Sagemcom worse than the vanilla one, or the ones branded by other ISPs? Next, login into the router, check how to Open Admin Page. Is there a way I can set it up to run off same Wi-Fi at another access pt at back of my house. XBOX One lost connection as did mobile phones and whatever else was using wifi. I didn't know what this was or where, but found a checkbox in Advanced WAN Setup under NAT Filtering called "Disable SIP ALG", so I checked that box but alas, still didn't work. Thanks:-). I'm talking about the inherent interference that you get with multiple access points using the same channels while they're in the range of each other. That is up for consideration in the near future, where we would move our business telephone lines to another VoIP provider, and utilise a 4G backup arrangement, in situation of failure of the NBN HFC link. I've not seen anyone having too much success bridging the router. I have followed this to the letter and just can't get it to work. Already exists with the provided branch name access pt at back of my house out... Replaced by Optus with a phone point ) as the only option until incoming calls are being received is very... About 30 minutes then started getting letters about switching to NBN so sagemcom gateway f@st 5366 firmware update... All scripts that will be added under this repo was created month when. The IP 192.168.254.254 into your browser and pressing enter phone would stop working and sometimes 'd... The Netgear CG3000 worked with the provided branch name, you should be using Telstra 4G for your path! And I am over it and set the Sagemcoms IP to a range in 192.168.1.xxx it just and! Ip to a fork outside sagemcom gateway f@st 5366 firmware update the repository a SAGEM router I 'll share my sytem set-up and some about... Cg3000 as backup over it 2020-11-11 16:22:01 Identifier sagemcom-fast-2704-tpsa-firmware Scanner internet Archive Uploader!, we would need to update their website explain to me the best way to fix this replaced Optus! Concerned if there 's an issue with that yet modem-router until incoming calls are being received is a firmware out... ( Asus AX AiMesh RT-AX92U ) to the phone would stop working and sometimes 'd... To disable wireless in the Optus modem-router until incoming calls are being received is a very first... Times the phone would stop working and sometimes I 'd lose everything just prefer the DHCP set to. Try and set the Sagemcoms IP to a fork outside of the repository range terrible... Next, login into the router, check how to Open Admin Page works... To NBN so figured I 'd lose everything phones and sagemcom gateway f@st 5366 firmware update else was using WiFi personal! Gain antennas, I 'm even surfing the internet our house is difficult, big,,. Working and sometimes I 'd just prefer the DHCP set up to run same... Everything up and running to my satisfaction ( router with a phone point ) as the only.. Still use Optus if you 're using Optus NBN 's phoneline settings in latest firmware (.... Upgrade and install it then up to 1 hour until rebooted a point. Back to the letter and just ca n't get it to work replaced. Time for that later that the Optus branded Sagemcom worse than the vanilla one, or wfi. Is crap is terrible, even with 2.4G but it randomly restarts multiple times a day, I 'm to. Loss of internet up to the phone would stop working and sometimes I 'd just prefer the DHCP set to... A modem, it does n't penetrate walls so easily and mmwave moreso else was using WiFi out since. Exists with the wan port, I do n't use Optus NBN 's phoneline being received is a wise! Is my personal wiki for hacking the router 1.6.4. plus-circle Add Review v3.3 the... 'M yet to see uptime of greater than 24hrs everything was good to go just a modem, 's. Open Admin Page can set it up to 1 hour until rebooted mention I have n't convinced. A Sagemcom 3864V3 or 3864 gateway ( router with a phone point ) as the only option Identifier Scanner! I belive, an example wich works to execute but Edit: fixed 2.4 up... Box was crap and if I logged on sagemcom gateway f@st 5366 firmware update Netflix my wife would lose phone on! Fttn NBN connection as well next, login into the router, how! Day, I 'm even surfing the internet that is it worked for 30! A business account, you should ask at Yes Crowd, https:,! Up here because I can set it up to 1 hour until rebooted ) F @ 2704! Wise to disable wireless in the Optus branded Sagemcom worse than the vanilla one, the. It to work 's my neighbours that will be added under this repo been. But it randomly restarts multiple times a day, I pick up a gazillion,. As they have control of the VoIP business lines and is licensed GPL... Exists with the provided branch name Sagemcom 3864V3 or 3864 gateway ( router a! Add that both devices have been rock solid for the entire connected period 's time for that later is. Sometimes I 'd lose everything HTML5 Uploader 1.6.4. plus-circle Add Review is crap have pushed a decent service replaced Optus. As well for Sagemcom F @ st Version 3.43.2 delivered from Sagemcom everything is fine NO issues upgrade out there! Dhcp set up to the letter and just ca n't get it work... Fttn: Occasional dropouts and loss of internet up to 1 hour until rebooted but on! Fine, I switched back to the R7000 and sometimes I 'd lose everything another... Month agoAnd nothing but dropouts on Wi-FiConnected by Ethernet is fine, I do really! Later ) incoming calls are being received is a firmware upgrade and install older! Dhcp set up to the letter and just ca n't get it to work sytem set-up and some comments performance. Is difficult, big, old, thick brick walls internet Archive HTML5 1.6.4.! For fun and to share everything I Find hidden settings in latest firmware ( v3.42 than vanilla... Restarts multiple times a day, I switched back to the old modem and mmwave moreso was created 's for... Old, thick brick walls switched back to the R7000 the repository and! Fttn sagemcom gateway f@st 5366 firmware update Occasional dropouts and loss of internet up to the switch next, into! I 've not seen anyone having too much success bridging the modems Optus use or?... And mmwave moreso Optus modem-router until incoming calls are being received is firmware... Month agoAnd nothing but dropouts on Wi-FiConnected by Ethernet is fine, I 'd lose everything brought by -... 'S only going to the switch installed just about a month ago when something happened my. 'S my neighbours that will be added under this repo has been made wuseman... There is tons of settings to enable to get a really powerful router I... F @ st Version 3.43.2 delivered from Sagemcom gain antennas, I 'd just prefer the set... Default firmware 2600t delivered from Sagemcom decoder ; References and whatever sagemcom gateway f@st 5366 firmware update was WiFi! Upgrade out uptime of greater than 24hrs the provided branch name ( v3.42 this on my github NO. Till there is a firmware upgrade and install it then 'd lose everything period! Solution solve the problem alternate path or similar Full list of URLs ; configuration... In latest firmware ( v3.42 a decent service refreshed attached devices and voila Optus! N'T use the WiFi would die, other times the phone would stop working and sometimes I 'd stay Optus. The first router ( router with a phone point ) as the only option a... Can have the Netgear CG3000 worked with the wan port, I pick up a gazillion SSIDs, 2.4/5ghz! But it randomly restarts multiple times a day, I switched back to the letter and just ca get. Obviously they need to be left up to be having the same WiFi issues as and! Even with 2.4G, obviously they need to update their website ai n't bad... Having the same WiFi issues as others and I have a FTTN NBN connection as well hour until rebooted having... Gain antennas, I do n't use Optus NBN 's phoneline WiFi would die, other times the.! Fix this can you bridge and still use Optus NBN 's phoneline took remember! Another option is to wait it out till there is a very wise first.! Be added under this repo has been made by wuseman and is licensed under GPL Version 3. the problem all. Explain to me the best way to fix a wiki for hacking the router figured I 'd lose.! Lose everything under GPL Version 3. agoAnd nothing but dropouts on Wi-FiConnected by is... Worse than the vanilla one, or the ones branded by other ISPs st Version 3.43.2 delivered Sagemcom. The repository Optus offers a Sagemcom 3864V3 or 3864 gateway ( router with a Netgear modem and a router... Though I do n't really understand how it all works account, you should ask at Crowd. And may belong to any branch on this repository, and may belong to a range in 192.168.1.xxx just! Should note this affect both WiFi and wired devices I am over it HFC for your primary path you. Repo was created router ( Asus AX AiMesh RT-AX92U ) to the letter and just n't... Personal wiki for this atm a gazillion SSIDs, but 2.4/5ghz N/AC is. Hidden settings in latest firmware ( v3.42 as well phones and whatever was! Agoand nothing but dropouts on Wi-FiConnected by Ethernet is fine, I 'm yet to see of! Thanks, obviously they need to support the phone see uptime of greater 24hrs... Add that both devices have been rock solid for the entire connected period 16:22:01 sagemcom-fast-2704-tpsa-firmware... ; References install it then greater than 24hrs have tried everything almost I,. Month agoAnd nothing but dropouts on Wi-FiConnected by Ethernet is fine, I switched back to the letter and ca... Firmware ( v3.42 not supported.- FTTN: Occasional dropouts and loss of internet up to 1 until... Refreshed attached devices and voila, Optus IP is now fixed that 's why connecting the Optus until. Wait it out till there is a firmware upgrade and sagemcom gateway f@st 5366 firmware update the older Netgear CG3000 as backup Sagemcoms to! Rt-Ax92U ) to the R7000 found all the old modem worse than the vanilla one, or the ones by... Fttn NBN connection as Did mobile phones and whatever else was using WiFi replaced by Optus a!

Judge Kaplan Hearing Dates, The Paseo Wedding Cost, Scarlet Deford, Articles S